What is a clean room? Why is it important to clean room data recovery? We examine these questions in advance.
What room clean ?
Clean rooms are designed to reduce the level of particulates in the air like dust and airborne microbes. Construction of cleanrooms employ depth filter. Outside air is filtered to prevent dust from entering the room. Filters and processes will be put in place in the room to remove internally generated contaminants during production and working areas are often filtered locally such as laminar flow.
Staff generally have to enter clean rooms through airlocks and wear protective gear when working indoors.
There is a "class" of different clean rooms, with each class limiting permissible different numbers of particles per cubic meter, and the maximum particle size. Thus, clean classrooms 1 is when the number of particles should not exceed 1,000 particles per cubic meter.
Cleanrooms are widely used in pharmaceutical, semiconductor and biotechnology. Data recovery centers typically use the proper grade of 100 liters, which has a budget of 100,000 particles per cubic meter (compared to 35 million particles per cubic meter at normal room).
What room clean ?
Clean rooms are designed to reduce the level of particulates in the air like dust and airborne microbes. Construction of cleanrooms employ depth filter. Outside air is filtered to prevent dust from entering the room. Filters and processes will be put in place in the room to remove internally generated contaminants during production and working areas are often filtered locally such as laminar flow.
Staff generally have to enter clean rooms through airlocks and wear protective gear when working indoors.
There is a "class" of different clean rooms, with each class limiting permissible different numbers of particles per cubic meter, and the maximum particle size. Thus, clean classrooms 1 is when the number of particles should not exceed 1,000 particles per cubic meter.
Cleanrooms are widely used in pharmaceutical, semiconductor and biotechnology. Data recovery centers typically use the proper grade of 100 liters, which has a budget of 100,000 particles per cubic meter (compared to 35 million particles per cubic meter at normal room).
Why use clean room data recovery?
Clean rooms are used for data recovery to prevent dust, electro static discharge and the disorder. This precaution is necessary because the microscopic dust particles may even harm the image of the disk platters, and difficult to recover the data.
With each generation of disks, the data is more densely on the disk platters. Therefore, it is increasingly important that data recovery has been attempted in the rooms were very clean.
Drive manufacturers usually specify that their product guarantee will not work if the device is opened by someone other than themselves or their agents. And usually one of the conditions they impose on authorized agents is that the disks be opened in clean room reaches a certain standard.
Thus clean rooms are needed for data recovery and performance aspects of the product warranty.
Clean Room Data Recovery
Hard drives are opened only in a clean room, where they remained until the recovery is complete and the device is closed. All devices are protected from electric shock, physical shocks, temperature fluctuations and power failures.
Staff wear special clothing while working in the rooms and particle density is constantly monitored using particle counters. Purpose typical Data Center Recovery cleanroom to maintain Class 10 conditions during production.
Hard drives are opened only in a clean room, where they remained until the recovery is complete and the device is closed. All devices are protected from electric shock, physical shocks, temperature fluctuations and power failures.
Staff wear special clothing while working in the rooms and particle density is constantly monitored using particle counters. Purpose typical Data Center Recovery cleanroom to maintain Class 10 conditions during production.
Conclusion
A data storage medium that filled more and more bold in each new generation of data units. Therefore, it is very important to try to recover data very dust free room.
These days, the use of a clean room class 100 cleanroom " data recovery ", in which the number of particles is reduced about 350 times in relation to the density of the particles that generally apply.
Center for Data Recovery cleanroom reached a higher level of dust free conditions during production operations. Even small dust particles in the disk platters can damage the image of the media and make it more difficult to recover data if not impossible.
0 komentar:
Posting Komentar